WA 082139125256, Wastewater Treatment (WWT)Training Operator IPAL

WA 082139125256, Wastewater Treatment (WWT)Training Operator IPAL

WWTP is a set of technical equipment along with equipment that processes / processes the residual liquid of factory production, so that the liquid is suitable to be disposed of into the environment. The connection with environmental management which includes prevention, mitigation of damage, pollution and restoration of environmental quality, requires the development of various sets of policy and program activities that are supported by environmental management support systems.

Wastewater treatment training Design & Expansion

The environmental management support system must be supported by Human Resources (HR) who are competent as waste treatment operators. Where the operator will play an important role in the operation of the WWTP system in the industry and prevent the possibility of procedural errors in operating WWTPs. Therefore, it is now mandatory for IPAL operators to understand the overall balance of competence from knowledge, skills, wisdom, experience, and practices that need to be known and controlled by an IPAL Operator.


PURPOSE OF IPAL OPERATOR TRAINING

Providing knowledge and knowledge related to the legal, technical and operational requirements of WWTP installations as a level and participating in environmental sustainability programs
It is expected that after completing this training there will be printed competent HR in wastewater treatment
Participants will get solutions to various kinds of problems that often occur in WWTPs and solutions
Getting updated information related to environmental issues, the latest WWTP technology, and other alternative technologies that are very useful in improving the IPAL system in the company

OPERATOR TRAINING MATERIAL

• Applicable Regulations / Law concerning Waste Management
• Basic Principles of Waste Management
• Characteristics of Industrial Waste
• Characteristics, Quality, and Standards of wastewater
• Industrial Waste Technology Management
• The purpose and method of wastewater treatment
• The Principle of Aerobic / Anaerobic Waste Management
• Waste Processing Parameters and Affecting Factors
• Analysis of the stages of the waste treatment process
• Lab Management Especially for Analysis of WWTP (COD and BOD)
• Liquid Waste Treatment System in physics, chemistry and biology
• Removal of residues suspended solids, nitrogen and phosphate
• Management aspects in the wastewater management community
• Planning and Control of WWTP

TRAINER : 

 Ir. Dwi Handaya, MK3

Founder of WWT Indonesian Forum wwt_ipal@yahoogroups.com,

Head of IdWA.or.id 2016 Indonesian Water Association

Industry practitioners experienced more than 25 years, both in the petrochemical industry, manufacturing, oil & gas, plantation, consultation etc. Have educational background in Chemical Engineering, University of Tirtayasa and Masters K3, University of Indonesia, Jakarta. Handle consultancy and training in a variety of large companies such as BP, Cargill, Sinarmas Group, Mayora, Indofood and others. Since 2008 is also listed as the instructor team EPCM Environmental Pollution Control Manager, as one of the environmental certification program manager, BPLHD West Java and LH national ministries. In the year 2012 until now has made various Assestmet of waste in countries in Asia, the Middle East and Europe.

Who Should Attend?

Whoever is responsible for minimizing long-term costs associated with water use, water treatment, drainage, sewage, waste water treatment and who is responsible for compliance with environmental regulations, including:

·        Supervisors / Managers, Engineers plant

·        Design Engineers,

·        environmental engineer

·        Original Equipment Manufacturers (OEM)

·        personnel regulations

·        Contractors, Researcher

·        Manufacture engaged Equipment Water, wastewater

·         The company advocates, Student, Others

Training duration :
2 days effective 14 hours (09:00 to 16:00)

Who Should Attend?

Whoever is responsible for minimizing long-term costs associated with water use, water treatment, drainage, sewage, waste water treatment and who is responsible for compliance with environmental regulations, including:

·        Supervisors / Managers, Engineers plant

·        Design Engineers,

·        environmental engineer

·        Original Equipment Manufacturers (OEM)

·        personnel regulations

·        Contractors, Researcher

·        Manufacture engaged Equipment Water, wastewater

·         The company advocates, Student, Others

Information :

Information on Training Schedule, Request Inhouse Training | Public Training, Contact : Customer Service 1 :  Phone (WA) : (+62)82.139.125.256 | Phone (WA) : (+62)87.850.925.256 Phone(Office) : (+6231) 3977660            

Sinar Global Consultant

Jl. Tenaru Driyorejo , Gresik, Jatim, Indonesia 61177 Office : Tel (+6231) 397-7660, Phone WA : +62821-3912-5256

Phone WA : +62878-5092-5256 Email : info@sinargllobal.co.id register.training.sinarglobal@gmail.com - Web : www.sinarglobal.co.id

WA082139125256, Eklusif Buku Perdana 10 Langkah Dalam Design & Ekspansi , WWT, STP, PWT

WA082139125256, Eklusif Buku Perdana 10 Langkah Dalam Design & Ekspansi , WWT, STP, PWT

Berikut tahapan dalam mendesain dan Exspansi , WWT, STP, PWT

1. Siapkan data existing WWT, STP,flow rate, dimensi peralatan,summary performance
2. Siapkan data rencana ekspansi,kapasitas tambahan, potensi quality limbah, sisa lahan tersedia
3. Siapkan data limbah domestik,jumlah karyawan, tamu dan kontraktor
4. Olah data total existing & ekspansi
5. Hitung estimasi regulasi campuran antara limbah industri, limbah domestik, untuk melihat potensi
WWT vs STP menguntungkan dicampur atau di pisah
6. Tentukan kunci design HRT, HSL, VOL,FM ratio, MCRT, RAS-WAS, organicload dll
7. Gambar PFD existing + eskpansi dan drawing layout, jika memungkinkan 3D drawing
8. Hitung biaya penambahan peralatan CAPEX dan OPEX
9. Project installasi, monitoring, MC, mechanical completion, test commissioing
10. Re start up system, combine start up,performance test.

Instalasi Pengolahan Air Limbah terdiri dari : 

1. WWT, waste water treatment adalah Industrial & Manufacturing
2. STP, sewage treatment plant adalah Limbah Domestik
3. PWT, Produce water treatment adalah Oil & Gas

Secara detil dibahas di Buku setebal 500 lembar eklusif, di Waste Water Treatment Seri 03. Free DVD/CD 10 Step mendesain dan Ekpansi WWT,STP,PWT Penulis Ir Dwi Handaya, MK3

Unit pengolahan air limbah(IPAL) kadang menjadi kendala yang sulit di selesaikan. Ada

berbagai faktor penentu keberhasilan unit WWT agar tercipta keberlanjutan bisnis

perusahaan jangka panjang dan juga lingkungan yang aman.

Pembahasan secara lengkap dapat mengikuti Pelatihan Training IPAL,WWT,WWTP denga menghubungi kami. WA 082139125256

WA.082139125256, Confirm Running,SURABAYA | 20-21 Dec 2018 Surabaya-Indonesia.WASTE WATER TREATMENT 2018 Seri 3 | Design and expansion of WWT, STP, PWT - Waste Water Treatment (WWT)

WA.082139125256, Confirm Running,SURABAYA | 20-21 Dec 2018 Surabaya-Indonesia.WASTE WATER TREATMENT 2018 Seri 3 | Design and expansion of WWT, STP, PWT - Waste Water Treatment (WWT)

WATER TREATMENT 2018 HADIR DI KOTA SURABAYA | SEAT TERBATAS 10 PESERTA WA.082139125256

WASTE WATER TREATMENT 2018 Seri 3 | Design and expansion of WWT, STP, PWT - Waste Water Treatment (WWT) | QUEST HOTEL SURABAYA | 20-21 Dec 2018 Surabaya-Indonesia.

Informasi kuota : WA telkomsel Kontak wa kami https://wa.me/6282139125256

Apa yang akan dibahas :

10 STEPS WWT DESIGN AND EXPANSION

1. Prepare Data Existing WWT, Flow Rate, Equipment Dimensions, Performance Summary
2. Prepare Expansion Plan Data, Additional Capacity, Potential Quality of Waste, Available Land Remaining
3. Prepare Domestic Waste Data, Number of Employees and Guests
4. Perform Data Total Existing + Expansion
5. Calculate the Estimation of Mixed Regulations Between Industrial Wastes and Domestic Waste, To See the Potential of WWT VS STP, Beneficial To Be Mixed Or Separated
6. Determine Key Design HRT, HSL, VOL, Fm Ratio, MCRT, RAS-WAS, Organic Load Etc
7. Picture of PFD Existing + Expansion and Layout
8. Calculate the Cost of Adding Capex and Opex Equipment
9. Project Installation, Monitoring, Mechanical Completion, Test Commissioning
10. Re-Start Up System, Combine Start Up, Performance Test

SINAR GLOBAL CONSULTANT | Training & Consulting Your Partnership To Grow !
Jl. Tenaru Driyorejo , Gresik, Jatim, Indonesia 61177 Tel (+6231) 3977660, Hp: 082139125256 Hp: 087850925256
Email : register.training.sinarglobal@gmail.com | info@sinarglobal.co.id - Web : www.sinarglobal.co.id


#wastewatertreatmentcourse,#wastewatertreatmentplantpdf,#wastewatertreatmentplantdesign,#wastewatertreatmentppt,#pengolahanlimbahwastewatertreatmentplant,#watertreatmentplantindonesia,#sewagetreatmentplanthotel,#proseswwtp,#carakerjasewagetreatmentplant,#pelatihanwatertreatment,#pelatihanwatertreatmentplant,#NavigasiHalaman,#pelatihanipal2018,#sertifikasioperatoripal,#pelatihanpengolahanairlimbah,#pelatihanipalrumahsakit,#trainingoperatoripal,#sertifikasiipal,#teknisiipal,#pelatihanmppa,#WASTEWATERTREATMENTPLANTWWTP,#InformasiTrainingWWTP